TECHNICAL SPECIFICATION
WF-VIP JAM5 L | ||
RF Frequency Band (MHz) | Application | RF Output Power (Watt) |
20-100 | HF; Radio Control Toys; Car Alarms | 50 |
135-175/240-280 | Walky-Talky (VHF) | 50 |
310-400 | Remote Control; Walky-Talky (UHF300) | 50 |
400-470 | Cellular NMT; Walky-Talky (UHF400); Cellular CDMA450; Car Alarm; Remote Control | 50 |
850-895/925-960; 725-775 | Cellular CDMA800/GSM900; UHF800; LTE4G | 50 |
TOTAL RF POWER | 250 |
WF-VIP JAM5 M | ||
RF Frequency Band (MHz) | Application | RF Output Power (Watt) |
1520-1580 | GPS & Satellite; Thuraya; Iridium; Odyssey; GlobalStar; Inmarsat; Aces; Elipso | 40 |
1805-1880/1920-1990 | Cellular HGSM1800, GSM1900/PHS | 80 |
2110-2170 | Cellular UMTS/WCDMA, CDMA2000 (3G) | 80 |
2400-2500/2620-2690 | WLAN & Bluetooth & WiFi2.4G, LTE, 4G | 40 |
3400-3600 | WiMax; Bluetooth | 10 |
TOTAL RF POWER | 250 |
WF-VIP JAM5 H | ||
RF Frequency Band (MHz) | Application | RF Output Power (Watt) |
725-775 | LTE700, 4G | 50 |
850-895; 925-960 | Cellular CDMA800/GSM900 | 50 |
1805-1880/1920-1990 | Cellular HGSM1800, GSM1900/PHS | 50 |
2110-2170 | Cellular UMTS/WCDMA, CDMA2000 (3G) | 50 |
2620-2690 | LTE2600, 4G | 50 |
TOTAL RF POWER | 250 |
Frequency Range | 20-3600MHz |
Total RF Power | 250Watt; MAX: 300Watt |
Jammer Module Number | 5 |
Channel Frequency Number | 15Bands; Max: 20Bands |
Cooling System | Systematic Smart Cooling System |
System Protection | VSWR, Over-voltage, Over-current |
Jamming Source | Digital Signal Source Synthesize Technology; Adjust Frequency and Output Watt |
Remote Control | Full System Operation Control With Battery Led display |
Antenna Type | High Gain Omnidirectional Antennas |
Number of Antennas | 5 |
Built in Battery | 35AH/24-28VDC |
Jammer Module | Each Jammer module with antenna con be used as a single jammer. All modules are controlled separately. |
Jammer Size | 565 х 460 х 270mm |
Jamming System Weight | Approx. 35kg |
Operating Temperature Range | -35°C ~+80°C |
Operating Humidity | Up to 80% |
CHARACTERISTIC OF JAMMER MODULES
• Each module is designed with three indication lights, to show Power, Run and Alarm (Antennae VSWR feedback status).
• Each module is with LED display to indicate the working frequency, output power ant etc.
• Each module is designed with 232 COM Port and USB cable, connected to the computer. Frequency bands and output power can be adjusted, and the working status can be monitored through this software.
REMOTE CONTROLLER
WF-VIP JAM5 - is design with a wired remote control unit, facilitating the operator to manage each module in any situation. This remote control unit can also display both internal and external battery level as well as built-in power supplies working status.
DDS MODULE SOFTWARE INTERFACE
DDS software interface is quite simply. The operators just move the mouse and then he can set up working frequency bands and output power of the modules. Each module can be up to 4 channels output at most.