WolvesFleet HIGH-POWER PORTABLE DDS MULTI-BAND JAMMING SYSTEM
TECHNICAL SPECIFICATION
| RF Frequency Band(MHz) | 20-100MHz 50W 27MHz, 35MHz, 41MHz, 72MHz toys and HM remote control |
| 300-500MHz 50W Low-power transmitters | |
| 300-500MHz 50W Walky-Talky, 315/433 Car remote control | |
| 800-1000MHz 50W Cellular CDMA, GSM | |
| 1800-2000MHz 50W DCS, Cellular 4G | |
| 2000-2200MHz 50W Cellular 3G | |
| 2400-2500MHz 20W WIFI, Bluetooth, WLAN | |
| 2500-2700MHz 40W Cellular 4G | |
| Total RF Power | 360W |
| Jammer Module Number | 8 |
| Jamming Frequency Bands Number | more than 20 Bands |
| Cooling System | Systematic Smart Cooling System |
| System Protection | VSWR, Over-voltage, Over-current |
| Jamming Source | Direct Digital Synthesize Technology |
| Remote Control | Full System Operation Control |
| Antenna Type | High Gain Omnidirectional Antennas |
| Number of Antenna | 8 |
| Battery Back Up Capacity | 50AH/24-28VDC |
| Modular Design | Each Jammer module with the antenna can be used as a single jamming. All modules can be controlled individually. |
| Size | 630x492x352mm |
| Weight | about41.62kg |
| Operating Temperature Range | -35°C ~+80°C |
| Operating Humidity Range | Up to 80% |
EXTERNAL BATTERY SPEC
| Voltage | 27V |
| Internal Resistence | 24mΩ |
| Size | 430х244х341mm |
| Recharge | 0.2C |
| Discharge | 1C |
| Weight | 15.12kg |
| DC Charger | INPUT: 100-230AC, OUTPUT: 29.2В/5A DC |
CHARACTERISTIC OF JAMMER MODULES
• Each module is designed with three indication lights, to show Power, Run and Alarm (Antennae VSWR feedback status).
• Each module is with LCD display to indicate the working frequency, output power and etc.
• Each Module is designed with 232 Com Port and USB cable to connected to the computer. Frequency bands and output power can be adjusted, and the working status can be monitored through this software.
REMOTE CONTROLLER
WF-VIP JAM8 is design with a wired remote control unit,facilitating the operator to manage each module in any situation. This remote control unit can also display both internal and external battery level as well as built-in power supplies’ working status.
DDS MODULE SOFTWARE INTERFACE
DDS software interface is quite simply. The operators just move the mouse and then he can set up working frequency bands and output power of the modules. Each module can be up to 4 channels output at most.
